| Sample volume | 2-50 ill (adjustable in 0.1 ill step) |
| Reaction volume | 18411 to 50411 |
| Reaction temperature | 37 °C ± 0.2 °C |
| Reaction time | Single reagent chemistry:30-600sec, Double reagent chemistry: 30-300sec |
| Calibration | Maximum 20 calibrators can be used 6 calibrators maximum per test On-board auto dilution of Calibrator |
| Mixing type | Variable speeds paddle mixer (Low, Middle, High) |
| Maintenance | Auto scheduling — Start of Day, End of Day |
| Identification | Position Identification for samples and reagents Fixed Bar code reader for Identification for samples |
| Water supply unit | NCCLS Type 2: Up to 4.5 liters/hour (approx) |
| Quality control | Up to 3 levels programmable for every parameter |
| System Warm-Up | 10 minutes system warm-up time |
| Level sensing and safety mechanism | Vertical & horizontal obstruction detection Capacitance based liquid level sensing |
| Noise level | Less than 65 dB with cover closed |
| CPU & Display | P-IV with ( 1GB)RAM, 40 GB or Higher Hard Drive, CD-RW, suitable WIN OS 15 inch TFT color display |
| Keyboard | Standard keyboard & standard mouse |
| Printer | External: A4 size DeskJet color printer (Optional) |
| System interface | Analyzer – PC: RS-232C bi-directional, PC – Printer: USB (Min 2 Ports) & a Serial Port PC – Host computer via serial RS232 or TCP/IP |
| Item | Description |
|---|
| Throughput | 100 test/hour with 1/2 reagent |
| System type | Discreet, open, fully automated, patient prioritized, selectable 1/2 reagent system |
| Sample | Serum, Urine, Plasma, CSF, Others |
| Measurement principle | Latex Enhanced Turbidimetric Immunoassay, Turbidimetric Immunoassay, Photometric (Rate/end point) |
| Onboard Reagent Positions | 25 positions of 20 ml bottles for R1/R2 |
| Programmable parameters | 50 photometric tests |
| Assay modes | End Point, Fixed time (2-point), Kinetic Rate-A, Kinetic Rate-B |
